Publication

E Jeong, K-C Lee, S-C Lee, J Seo, and J Lee (2020) “Prediction of Dowel Action against Concrete Core without Consideration of Transverse Reinforcement,” Journal of Structural Engineering, ASCE, accepted.

 S-C Lee, S-W Yoo (2020) “The Effect of Material Factors on KCI Shear Design Provisions,” Journal of the Korea Concrete Institute, in publication (in Korean).

S-C Lee, K-J Shin, and C-L Kim (2020.06) “Mechanical Properties of Concrete Using Recycled Coarse Aggregate from Nuclear Power Plant Simulated Concrete,” Journal of the Korean Recycled Construction Resources Institute, Vol. 8, No.2, pp. 167-174 (in Korean).

S-C Lee (2020.06) “Shear Behavior Model on Crack Surface Subjected to Cyclic Load,” Journal of the Korea Concrete Institute, Vol. 32, No.3, pp. 259-266 (in Korean).

S-C Lee, and K-J Shin (2020.04) “Shear Strength Model for HPFRCC Beams with Main Longitudinal Tensile Reinforcements,” Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 24, No. 2, pp. 60-67 (in Korean).

H S Choi, K-C Lee, S-C Lee, and J Lee (2019.12) “Interaction Analysis of Sliding Slab Track on Railway Bridge Considering Behavior of End-Supporting Anchors,” International Journal of Steel Structures, Vol. 19, No. 6, pp. 1939-1950.

S-W Choi, J Choi, and S-C Lee (2019.07) “Probabilistic Analysis for Strain-Hardening Behavior of High-Performance Fiber-Reinforced Concrete,” Materials, Vol. 12, No. 15, pp. 2399.

J Choi and S-C Lee (2019.04) “Sectional Analysis Procedure for Reinforced Concrete Members Subjected to Pure Torsion,” Advances in Civil Engineering, Vol. 2019, Article ID 6019321.

K-J Shin, S-C Lee, and Y-Y Kim (2019.03) “High Ductile Fiber Reinforced Concrete with Micro Fibers,” Journal of the Korea Institute for Structural Maintenance and Inspection, Vol. 23, No. 2, pp. 92-98 (in Korean).

Y M Yun, Y-J Lee, S-S Park, S-C Lee, and S G Lim (2019.02) “Effective Strength of Concrete Struts for a Three-dimensional Four-pile Cap Strut-and-Tie Model,” Journal of the Korea Concrete Institute, Vol. 31, No. 1, pp. 49-59 (in Korean).

K-C Lee, I-W Lee, and S-C Lee (2018.09) “Biaxial Shear Load Capacity of Anchor System for Quick-Hardening Track on Railway Bridges,” Advances in Civil Engineering, Vol. 2018, Article ID 9179343.

J-H Cheon, S-C Lee, C-L Kim, and H-G Park (2018.06) “Feasibility Study on Recycling of Concrete Waste from NPP Decommissioning Through Literature Review,” Journal of the Korean Recycled Construction Resources Institute, Vol. 6, No. 2, pp. 115-122 (in Korean).

S A Olubiyi, S-C Lee, and C-J Hah (2018.08) “Effect of Mineral Admixtures in Concrete on Biological Shield Wall Radiation in ARP1400,” Progress in Nuclear Energy, Vol. 107, pp. 110-115.

S-C Lee, S Park, J Lee, K-C Lee (2018.04) “Dowel Behavior of Rebars in Small Concrete Block for Sliding Slab Track on Railway Bridges,” Advances in Materials Science and Engineering, Vol. 2018, Article ID 3182419.

E O Jude, C-H Oh, S-C Lee (2018.03) “Single Web Shear Element Model for Shear Strength of RC Beams with Stirrups,” International Journal of Concrete Structures and Materials, Vol. 12, No. 3, pp. 301-313.

K-J Shin, S-C Lee, Y Y Kim, J-M Kim, S Park, H Lee (2017.08) “Construction Condition and Damage Monitoring of Post-Tensioned PSC Girders Using Embedded Sensors,” Sensors, Vol. 17, No. 8, Article ID 1843.

S-C Lee, K-J Shin, J-M Kim, H Lee (2017.06) “Damage Detection with FBG Sensors for Pre-Stress Concrete Girders,” Key Engineering Materials, Vol. 737, pp. 454-458.

S-C Lee, H-B Kim, C Joh (2017.04) “Inverse Analysis of UHPFRC Beams with a Notch to Evaluate Tensile Behavior,” Advances in Materials Science and Engineering, Vol. 2017, Article ID 6543175.

S-C Lee, S Y Jang, K-C Lee (2017) “Evaluation of Shear Load Carrying Capacity of Lateral Supporting Concrete Block for Sliding Track Considering Construction Joint,” Journal of Computational Structural Engineering Institute of Korea, Vol. 30, No. 1, pp. 55-61 (in Korean).

Y-J Choi, S-C Lee, C-L Kim (2017.01) “Proposal for Effective Disposal Options of Very Low Level Decommissioning Waste,” Progress in Nuclear Energy, Vol. 94, pp. 36-45.

Y-B Choi, S-C Lee (2016) “Nonlinear Finite Element Analysis for RC Shear Wall with an Opening Considering Rebar Development Length,” Journal of Computational Structural Engineering Institute of Korea, Vol. 29, No. 6, pp. 547-554 (in Korean).

S-C Lee, K B Kipkorir, Y Choi, H-B Kim, C-H Oh, N B Thanh (2016) “Effective Prestress Force Considering Instantaneous Loss in Reactor Containment Building,” International Journal of Engineering Research and Development, Vol. 12, No. 11, pp. 18-23.

S-C Lee, Y-S Kang, and S Y Jang (2016) “Analysis of Shear Behavior of Shear Key for Concrete Track on Railway Bridge Considering Construction Joint,” Journal of the Korean Society for Railway, Vol. 19, No. 3, pp. 341-350 (in Korean).

Y-J Choi, S-C Lee, and C-L Kim (2016) “Evaluation on Radioactive Waste Disposal Amount of Kori Unit 1 Reactor Vessel Considering Cutting and Packaging Methods,” Journal of Nuclear Fuel Cycle and Waste Technology, Vol. 14, No. 2, pp. 123-134 (in Korean).

S-C Lee, J-H Oh, and J-Y Cho (2016.06) “Fiber Efficiency in SFRC Members Subjected to Uniaxial Tension,” Construction and Building Materials, Vol 113, pp. 479-487.

H Park, S Jeong, S-C Lee, and J-Y Cho (2016.04) “Flexural Behavior of Post-Tensioned Prestressed Concrete Girders with High-Strength Strands,” Engineering Structures, Vol 112, pp. 90-99.

S-C Lee, J-Y Cho, and F J Vecchio (2016.03) “Analysis of Steel Fiber-Reinforced Concrete Elements Subjected to Shear,” ACI Structural Journal, Vol. 113, No. 2, pp. 275-285.

K-J Shin, Y-U Park, S-C Lee, Y Y Kim, and H-W Lee (2015) “Experimental Evaluation of Prestress Force in Tendons for Prestressed Concrete Girders using Sensors,” Journal of Computational Structural Engineering Institute of Korea, Vol 28, No. 6, pp. 715-722 (in Korean).

S-C Lee, S-Y Choi, K-J Shin, J-M Kim, and H-W Lee (2015) “Measurement of Transfer Length for a Seven-Wire Strand with FBG Sensors,” Journal of Computational Structural Engineering Institute of Korea, Vol 28, No. 6, pp. 707-714 (in Korean).

S-C Lee, J-H Oh, and J-Y Cho (2015) “Fiber Orientation Factor on Rectangular Cross-Section in Concrete Members,” International Journal of Engineering and Technology, Vol. 7, No. 6, pp. 470-473.

K-J Shin, S-C Lee, and Y Y Kim (2015.11) “Role of Fine Aggregates on Mechanical Properties of Mortar,” Materials Research Innovations, Vol. 19, No. S8, pp. 690-692

S-C Lee, T-H Song, and K-J Shin (2015.11) “Shear Strength of HPFRCC Beams with Longitudinal Reinforcement,” Materials Research Innovations, Vol 19, No. S8, pp. 277-280

S-C Lee (2015.11) “Re-evaluation of Fiber Reinforced Concrete Tension Model in CEB-FIP Model Code 2010,” Materials Research Innovations, Vol. 19, No. S8, pp. 107-110

K-J Shin, K-H Jang, Y-C Choi, and S-C Lee (2015.04) “Flexural Behavior of HPFRCC Members with Inhomogeneous Material Properties,” Materials, Vol 8, No. 4, pp. 1934-1950.

S-C Lee, J-H Oh, and J-Y Cho (2015.03) “Compressive Behavior of Fiber Reinforced Concrete with End-hooked Steel Fibers,” Materials, Vol 8, No. 4, pp. 1442-1458.

S-C Lee, J-H Oh, and J-Y Cho (2014) “Fiber Orientation Factor on a Circular Cross-Section in Concrete Members,” Journal of the Korea Concrete Institute, Vol. 26, No. 3, pp. 307-313 (in Korean).

J Deluce, S-C Lee, and F J Vecchio (2014) “Crack Model for Steel Fiber-Reinforced Concrete Members Containing Conventional Reinforcement,” ACI Structural Journal, Vol. 111, No. 1, pp. 93-102.

S-C Lee, J-Y Cho, and F J Vecchio (2013) “Simplified Diverse Embedment Model for SFRC Elements in Tension,” ACI Materials Journal, Vol. 110, No. 4, pp. 403-412.

S-C Lee, J-Y Cho, and F J Vecchio (2013) “Tension Stiffening Model for Steel Fiber Reinforced Concrete Containing Conventional Reinforcement,” ACI Structural Journal, Vol. 110, No. 4, pp. 639-648.

S-C Lee, K-J Shin, and B-H Oh (2011) “Cyclic Pull-Out Test of Single PVA Fibers in Cementitious Matrix,” Journal of Composite Materials, Vol. 45, No. 26, pp. 2765-2772.

S-C Lee, J-Y Cho, and F J Vecchio (2011) “Diverse Embedment Model for Steel Fiber Reinforced Concrete in Tension: Model Verification,” ACI Materials Journal, Vol. 108, No. 5, pp. 526-535.

S-C Lee, J-Y Cho, and F J Vecchio (2011) “Diverse Embedment Model for Steel Fiber Reinforced Concrete in Tension: Model Development,” ACI Materials Journal, Vol. 108, No. 5, pp. 516-525.

S-C Lee, J-Y Cho, and F J Vecchio (2011) “Model for Post-Yield Tension Stiffening and Rebar Rupture in Concrete Members,” Engineering Structures, Vol. 33, Issue 5, pp.1723-1733.

K-J Shin, J-H Kim, J-Y Cho, and S-C Lee (2011) “Flexural Behavior of High Performance Fiber Reinforced Cementitious Composites (HPFRCC) Beam with a Reinforcing Bar,” Journal of the Korea Concrete Institute, Vol. 23, No. 2, pp. 169-176 (in Korean).

S-C Lee, J-H Kim, J-Y Cho, and K-J Shin (2010) “Tension Stiffening of Reinforced High Performance Fiber Reinforced Cementitious Composites (HPFRCC),” Journal of the Korea Concrete Institute, Vol. 22, No. 6, pp. 859-866 (in Korean).

S-C Lee, J-Y Cho, and B-H Oh (2010) “Shear Behavior of Large-Scale Post-Tensioned Girders with Small Shear Span-Depth Ratio,” ACI Structural Journal, Vol. 107, No. 2, pp. 137-145.

B-H Oh, S-C Lee, S-Y Park, and B-S Kim (2005) “Transverse Behavior of Deck Slabs in Prestressed Concrete Box Girder Bridges According to Haunch-Dimensions,” Journal of Korean Society of Civil Engineers, KSCE, Vol. 25, No. 2A, pp. 271-280 (in Korean)